MOBILE SOLID-LIQUID SEPARATION SYSTEM

Mobile & Flexible

Equipped with a mobile carrier, it can conveniently and swiftly appear in various scenes that require sludge dewatering treatment, especially suitable for on-site processing of small to medium-scale sludge.

Compact in size, yet fully functional

It has a complete sludge dewatering treatment capability and is equipped with external pipelines and connectors. On-site operation only requires connecting the sludge inlet, sludge cake outlet, tap water inlet, filtrate return outlet, and the power supply  to achieve sludge dewatering treatment.

Suitable for a wide range of sludge concentrations

When the SS of untreated sludge is between 3000-50000mg/L, after undergoing treatment using a mobile solid-liquid separation system, the moisture content of the sludge cake at the water treatment plant can be consistently maintained below 65%.

Initial investment is low.

It can meet the sludge dewatering treatment for multiple sludge processing sites. Each sludge processing site only needs to be equipped with a corresponding sludge storage tank to meet the requirements for sludge dewatering treatment.

High utilization rate

The system can adopt a shared equipment model for multiple wastewater treatment sites, increasing the system's utilization rate and significantly reducing procurement and operational costs.

Fully automatic control, simple operation

It can achieve 24-hour fully automatic control without on-site personnel monitoring. The system's dewatering performance is stable, ensuring that the sludge moisture content meets the requirements

WTP- Futian, Shenzhen

(design capacity-400,000m³/h）

During June and September 2016, a mobile solid-liquid separation system was employed for emergency sludge treatment, with a peak daily processing capacity of up to 64 tons. This effectively resolved the sludge disposal issues during the commissioning and operation phase of Futian Water treatment plant.

Waterworks-Bao'an, Shenzhen

(design capacity-160,000m³/h）

The mobile solid-liquid separation system is used to treat sludge from waterworks, resulting in a reduction of over 95% in sludge volume. Achieving sludge volume reduction, also providing convenience for sludge disposal.

Waterworks-Longgang, Shenzhen

(design capacity-35,000m³/h）

Currently, a mobile solid-liquid separation system is being utilized to treat the accumulated sludge in the factory's raw water buffer pond to ensure the water quality.